Choosing an accessibility ramp should be simple, but once you start looking at the options, it can get confusing pretty quickly.
You might have a small lip at the front door. Or a step into the garage. Or a raised shopfront entry that catches prams, trolleys or wheelchair wheels. At first glance, it looks like a tiny height difference. But if you have to deal with it every day, that little edge becomes a proper nuisance.
That is where a rubber threshold ramp can make life much easier.
At Rubbr, our accessibility ramp range is designed for everyday access problems around homes, workplaces, shops, garages and commercial spaces. These are not big construction ramps or complicated access systems. They are solid rubber ramps made to help people, wheels and equipment move more smoothly over small raised edges.
The main thing is choosing the right ramp for the situation. A doorway used by a pram may not need the same ramp as a wheelchair access point. A standard laundry threshold may need something different to a wider shopfront entry. A low 25mm lip is a very different job to a taller garage edge.
So this guide will walk you through the differences between the Rubbr accessibility ramps, where each one makes sense, how to measure properly, and what to do if you are not sure which one to choose.
And if you are unsure, that is completely fine. Our customer support is based in-house at our Windsor warehouse, and the Rubbr team is always happy to help you choose the best product. You can send photos, measurements or questions, and we will guide you through it.
We also offer free local pickup from Windsor, or delivery NSW wide.
What Is an Accessibility Ramp?
An accessibility ramp helps create a smoother transition between two surfaces at different heights.
In simple terms, it helps you get over a raised edge without the bump, catch or trip risk.
That raised edge might be a door threshold, a sliding door track, a garage lip, a small step, a shopfront entry, a shed entrance, or a raised edge between two floor levels. These height changes often look minor, but they can cause real issues for wheelchair users, people with mobility aids, prams, delivery trolleys, carts and even general foot traffic.
A rubber threshold ramp sits against the raised edge and creates a gradual slope. Instead of wheels hitting the lip directly, they roll up and over it. Instead of someone stepping awkwardly over a small edge, the transition becomes smoother and more manageable.
That is the whole point. A good accessibility ramp should make the entry easier to use without turning it into a building project.
The Rubbr Accessibility Ramp Range
Rubbr’s accessibility ramp collection includes three main options:
They are all designed to solve similar access problems, but they are not exactly the same. The best ramp depends on the width of the entry, the height of the threshold, how much room you have for the ramp, and whether it will be used for wheelchairs, prams, trolleys, carts or general access.
The 900mm Solid Rubber Threshold Ramp is the simple, practical option for lower thresholds and standard access points. It is a good choice for common home doorways, garage lips, shed entries, laundry doors and small raised edges where you just need to smooth out a low step.
The 1000mm Solid Rubber Threshold Ramp gives you more width and more sizing options. This is often the better choice for wider doorways, commercial entries, garage thresholds, workplace access points and situations where you want a ramp that more closely matches the height of the edge.
The Solid Rubber Wheelchair Threshold Door Ramp With Winged Edges is the more access-focused option. The winged side edges make it easier to approach the ramp from an angle, which is particularly useful for wheelchair users, walkers, mobility aids, prams and trolleys where people are not always moving perfectly straight through the doorway.
Think of it this way: the 900mm ramp is the straightforward everyday fix, the 1000mm ramp gives you more flexibility, and the winged wheelchair ramp is the best option when mobility access is the main priority.
When to Use the 900mm Solid Rubber Threshold Ramp
The 900mm Solid Rubber Threshold Ramp is ideal when the access point is fairly standard and the height difference is relatively low.
This is the type of ramp you would use for a doorway or entry point that has a small but annoying lip. It might be a back door, laundry door, garage entry, shed entrance or internal transition where pram wheels, trolley wheels or feet keep catching.
It works well for everyday situations where you do not need a large or highly specialised ramp. If the problem is simply that the threshold is raised and you need a smoother way over it, the 900mm ramp is often a good place to start.
For example, if you have a small step into the garage and you regularly move bins, tools, storage tubs or a trolley through that space, a 900mm rubber threshold ramp can make that movement much easier. The same applies to a home doorway where a pram or walker catches on the lip.
This ramp is not necessarily the one I would choose for a wider commercial entrance or a taller threshold. For those, the 1000mm range or the winged wheelchair ramp may be more suitable. But for common low thresholds around the home or workplace, the 900mm option is a simple and practical solution.
When to Use the 1000mm Solid Rubber Threshold Ramp
The 1000mm Solid Rubber Threshold Ramp is the better option when you need extra width or a more specific ramp size.
That extra width can be useful for wider doorways, shopfronts, commercial spaces, garage entries and access points where wheelchairs, prams, trolleys or carts are moving through regularly. It gives a bit more room to work with, which can make the ramp feel easier and more forgiving in daily use.
The other major benefit of the 1000mm ramp range is that it comes in more height and length options. That matters because not every threshold is the same height. A 10mm doorway lip does not need the same ramp as a 65mm garage edge.
Ramp height and ramp length work together. The height needs to match the threshold, while the length affects how steep the slope feels. A taller threshold usually needs a longer ramp so the incline is not too sharp.
This is why the 1000mm ramp is often the better choice for commercial entries, garages, workshops and wider home access points. You can choose a ramp that better suits the actual height of the raised edge rather than trying to make one generic ramp do every job.
If you are choosing between the 900mm and 1000mm ramp, ask yourself: is the doorway wider than standard, is the threshold higher than a small lip, or will the ramp be used regularly by wheelchairs, prams, carts or trolleys? If the answer is yes, the 1000mm range is probably worth looking at first.
When to Use the Wheelchair Threshold Ramp With Winged Edges
The Solid Rubber Wheelchair Threshold Door Ramp With Winged Edges is the best option when wheelchair or mobility access is the main concern.
The difference is in the side profile. A standard threshold ramp usually has a straight edge on the sides. A winged threshold ramp has bevelled side edges, which means the ramp can be approached more easily from different angles.
That is important because real access rarely happens in a perfectly straight line. A wheelchair user might approach a patio door from the side. A walker might come through at an angle. A pram might need to turn as it enters. A trolley might not line up perfectly with the doorway every time.
The winged edges make that movement feel more natural and less restricted.
This ramp is a strong choice for wheelchair access, mobility aids, walkers, prams, shop entries, patio doors, sliding doors, home access points and commercial spaces where people may not approach the ramp straight on.
It is also useful when you want the side transitions to be smoother, not just the front approach. That can make a real difference in tighter areas where turning space is limited.
If someone will be using the ramp every day with a wheelchair, walker or mobility aid, this is often the product I would be looking at first.
The Difference Between the Ramps
The easiest way to understand the difference is to look at the job each ramp is best suited for.
The 900mm Solid Rubber Threshold Ramp is best for standard low thresholds. It is simple, practical and well suited to everyday home and light workplace access issues.
The 1000mm Solid Rubber Threshold Ramp is best when you need more width or more size flexibility. It suits wider entries, taller thresholds, commercial doorways, garages and workplaces where you need to match the ramp more closely to the access point.
The Wheelchair Threshold Ramp With Winged Edges is best for mobility access, angled approaches and smoother side transitions. It is especially useful for wheelchairs, walkers, prams and trolleys where people may approach from more than one direction.
None of these ramps are “better” in every situation. They are just suited to different problems.
A low laundry lip does not need the same solution as a wheelchair access point. A shopfront entry does not need the same setup as a small shed threshold. The best ramp is the one that matches the height, width and real use of the space.
How to Measure for the Right Ramp
Measuring properly is the most important step.
A lot of people want to guess because the threshold “looks about right”. The problem is that thresholds are sneaky. A lip that looks small can be taller than expected, and a ramp that is slightly wrong can feel awkward once it arrives.
Start by measuring the height of the threshold. Place your tape measure on the lower surface and measure straight up to the top of the raised edge. This tells you the ramp height you need.
Then measure the width of the doorway or access point. This helps you decide whether a 900mm ramp is enough or whether the 1000mm ramp gives better coverage.
Finally, measure the space in front of the threshold. This tells you how much room you have for the ramp length. A longer ramp usually creates a gentler slope, but you need enough floor space for it to sit properly without blocking a door swing, walkway or turning area.
The three measurements you need are:
-
Threshold height
-
Entry width
-
Available space in front of the threshold
If the ramp is for wheelchair access, also think about the approach angle. Does the wheelchair come straight at the doorway, or does it turn in from the side? Is there enough space to line up with the ramp? Does the user need to turn immediately after crossing it?
If the approach is angled, the winged-edge ramp may be the better choice.
If the ramp is mainly for trolleys or prams, measure the wheel width and think about how the item moves through the entry. A loaded trolley needs more stability and a smoother slope than an empty one. A pram may need enough width so it does not have to be lined up perfectly every time.
The more accurate the measurements, the easier it is to choose the right ramp.
Choosing a Ramp for Home Access
For home use, the right ramp depends on the doorway and how it will be used.
A small raised lip at the front door, back door or laundry may only need the 900mm Solid Rubber Threshold Ramp. This is especially true if the main users are prams, walkers, foot traffic or light trolleys.
For a wider patio door, garage entry or higher threshold, the 1000mm Solid Rubber Threshold Ramp may be the better choice. The extra width and size options make it more flexible for different access points around the home.
If the ramp is for wheelchair access, especially where the user approaches from an angle or needs to turn through the doorway, the Solid Rubber Wheelchair Threshold Ramp With Winged Edges is often the most suitable option.
At home, the ramp should make daily movement easier without getting in the way. It might help someone move independently through a doorway, make pram access smoother, reduce trip risk, or make it easier to roll bins, tools or storage items through the garage.
The goal is not to overcomplicate the house. It is to remove the annoying little barrier that keeps causing problems.
Choosing a Ramp for a Business or Shopfront
For a business, the ramp often needs to work for more people.
Customers, staff, delivery drivers, parents with prams, people using mobility aids and people moving stock may all use the same entry. That means you should think about width, stability and ease of use.
For a small shopfront lip, the 1000mm Solid Rubber Threshold Ramp is often a strong option because it gives more coverage across the entrance. If wheelchair access is a priority, the winged-edge ramp may be better, especially if the entry is approached from an angle.
For storerooms, back-of-house areas and commercial doorways where trolleys or carts are used often, choose the ramp based on the height of the threshold and the type of wheels moving over it. A busy trolley path needs a ramp that feels smooth and stable, not something that is “close enough”.
In public or high-traffic areas, you may also need to think about fixing the ramp securely. A ramp that shifts around at a business entrance is not going to inspire much confidence.
Choosing a Ramp for a Warehouse, Garage or Workshop
Warehouses, garages and workshops usually need ramps for trolleys, carts, bins, tools, stock or equipment.
In these spaces, the ramp needs to be practical and durable. It should sit securely, handle regular use and make movement easier for the people actually working there.
For a low garage lip or small shed threshold, the 900mm ramp may be enough. For a wider workshop entry or a taller raised edge, the 1000mm range is usually a better starting point.
If staff are moving carts through the doorway regularly, do not choose the smallest ramp just because it technically fits. Think about how often it will be used. A ramp that is used twenty times a day needs to be easy and comfortable to roll over.
If mobility access is also needed in the same area, consider the winged-edge wheelchair ramp.
Indoor vs Outdoor Use
Rubbr’s accessibility ramps are made from solid rubber and can be used indoors or outdoors, but you should still think about the environment.
Indoors, the main focus is stability. The ramp should sit flat, line up with the threshold and avoid interfering with door movement, mats or floor finishes.
Outdoors, you need to think about water, dirt, leaves and weather. A rubber ramp should be kept clear so the surface maintains grip and the ramp sits properly. If leaves or debris build up around it, give it a quick sweep or hose down.
Outdoor ramps may also need more regular checks, especially if they are in a busy area or exposed to rain and dirt. Make sure the ramp has not shifted and that the approach remains clear.
Free Local Pickup and NSW-Wide Delivery
Rubbr offers free local pickup from our Windsor warehouse, which is a great option if you are nearby and want to collect your ramp directly.
We also offer delivery NSW wide, so whether you are buying for a home, shop, warehouse, workplace or commercial site, we can help get the ramp to you.
Delivery costs may vary depending on the product size, weight and delivery location, but you will see the shipping cost before completing your order.
If you are unsure whether pickup or delivery is the best option, contact the Rubbr team and we can help you work it out.
Need Help Choosing? Contact the Rubbr Team
If you are unsure which ramp to buy, please contact us before ordering.
We would much rather help you choose the right ramp than have you guess and end up with something that does not suit the threshold.
Our customer support is based in-house at Windsor, and the team is always ready to help you find the best product. You are not dealing with a random call centre. You are dealing with people who understand the range and can help you choose based on your actual doorway, step, garage lip or access point.
The best thing you can do is send us a few photos and measurements. Ideally, include:
-
A photo of the whole doorway or access point
-
A close-up photo of the threshold
-
A tape measure showing the height of the lip
-
The width of the doorway
-
How much space is available in front of the threshold
-
What the ramp will be used for
Let us know whether it is for a wheelchair, walker, pram, trolley, cart, foot traffic or general access. Also tell us whether the ramp will be indoors or outdoors.
With that information, we can guide you toward the right option.
Sometimes that will be the 900mm ramp. Sometimes it will be the 1000mm ramp. Sometimes the winged-edge wheelchair ramp will make the most sense.
And if we think a product is not right for your situation, we will tell you.
Frequently Asked Questions
What is the best accessibility ramp for a doorway?
It depends on the threshold height, doorway width and how the ramp will be used. The 900mm Solid Rubber Threshold Ramp is a good option for standard low thresholds. The 1000mm Solid Rubber Threshold Ramp gives more width and size flexibility. The Solid Rubber Wheelchair Threshold Ramp With Winged Edges is best when wheelchair or mobility access is the main priority.
How do I measure for a threshold ramp?
Measure the vertical height from the lower floor to the top of the raised threshold. Then measure the width of the doorway and the available space in front of the threshold. These three measurements will help you choose the correct ramp height, width and length.
Should I choose the 900mm or 1000mm ramp?
Choose the 900mm ramp for standard low thresholds and simple access points. Choose the 1000mm ramp if the doorway is wider, the threshold is taller, or you want more size options.
When should I choose the ramp with winged edges?
Choose the winged-edge wheelchair threshold ramp when wheelchair or mobility access is important, especially if the person approaches the doorway from an angle. The bevelled side edges make the ramp more forgiving and easier to approach from different directions.
Can these ramps be used outside?
Yes, Rubbr’s solid rubber threshold ramps can be used indoors or outdoors. For outdoor use, keep the ramp clear of dirt, leaves and debris so it stays stable and maintains grip.
Are rubber threshold ramps good for trolleys and prams?
Yes. Rubber threshold ramps are useful for prams, trolleys, carts, cleaning equipment, tool carts and general wheeled access over small raised edges.
Do accessibility ramps need to be fixed down?
Not always. In lower-traffic home settings, the ramp may sit securely in place. In commercial, public access or high-traffic areas, suitable fixings may be recommended to keep the ramp stable.
Can I pick up my ramp locally?
Yes. Rubbr offers free local pickup from our Windsor warehouse.
Do you deliver accessibility ramps?
Yes. Rubbr offers NSW-wide delivery.
What if I am not sure which ramp to buy?
Contact the Rubbr team. Our customer support is based in-house at Windsor, and we can help you choose the best accessibility ramp for your doorway, threshold, garage lip or access point.
Final Thoughts
The right accessibility ramp can make a doorway, garage lip, shopfront or raised entry point much easier to use.
The key is choosing the ramp that matches the situation.
Use the 900mm Solid Rubber Threshold Ramp for standard low thresholds and simple access points.
Use the 1000mm Solid Rubber Threshold Ramp when you need more width, more size flexibility or a ramp for a wider or taller raised edge.
Use the Solid Rubber Wheelchair Threshold Ramp With Winged Edges when wheelchair or mobility access is the main priority, especially where angled approaches are involved.
Measure the height, width and available space before ordering. Think about who or what will use the ramp. And if you are not sure, contact the Rubbr team.
We are based in-house at Windsor, we offer free local pickup and NSW-wide delivery, and we are always happy to help you find the best product.
A small raised edge should not make access difficult. With the right rubber threshold ramp, it does not have to.