Some access problems are obvious.
A flight of stairs. A steep driveway. A big step up into a building.
Others are much more annoying because they look so small.
A raised door lip. A 25mm step into the shed. The edge of a garage. A doorway track that catches trolley wheels every time. That little change in floor height that seems harmless until you are pushing a pram, moving a delivery trolley or trying to get a wheelchair through the door.
Then it stops being “just a little lip”.
It becomes the thing everyone swears at.
That is exactly what a threshold ramp is for.
A threshold ramp creates a smooth path between two surfaces that sit at different heights. Instead of wheels hitting a hard edge, or someone having to step awkwardly over a raised doorway, the ramp gives you a gradual transition.
Simple idea. Big difference.
At Rubbr, we have been working with specialised rubber products for more than 20 years. We know that the best rubber products are usually not the flashy ones. They are the ones that quietly fix a problem you deal with every day.
Our threshold ramps are made for those jobs.
They are designed for awkward doorways, raised entry points, small curbs, garage lips and uneven surfaces where wheelchairs, trolleys, carts, prams or people need a smoother way through.
No major construction. No ripping up flooring. No trying to wedge a piece of timber under the door and hoping it stays there.
Just the right piece of rubber in the right place.
What Is a Threshold Ramp?
A threshold ramp is a small ramp that sits against a raised edge.
That edge might be a doorway threshold, a small curb, a garage entrance, a shed lip, a shopfront entry or a change in flooring level between two rooms.
The ramp starts at the lower surface and rises gradually to meet the raised surface. That makes it easier for wheels, feet and equipment to move from one side to the other.
Threshold ramps are useful for:
-
Wheelchairs and mobility aids
-
Trolleys and carts
-
Prams and strollers
-
Delivery equipment
-
Tool carts and workshop gear
-
Doorways with raised lips
-
Garage and shed entries
-
Small steps and curbs
-
Indoor and outdoor access points
The point is not to turn every doorway into a commercial wheelchair ramp.
The point is to stop a small height change from becoming an obstacle course.
Why a Small Doorway Lip Can Cause a Big Problem
A 10mm, 25mm or 40mm lip does not sound like much.
Until you try to push something with wheels over it.
For wheelchair users, a raised threshold can catch the front wheels and make getting through the door harder than it should be. For someone using a walker, it can create an awkward and unstable step. For parents with prams, it can mean lifting the front wheels every single time they go in or out.
In a warehouse or workplace, it can mean staff repeatedly bumping trolleys over the same raised edge. That slows things down, makes noise, puts extra strain on people and eventually gives someone the job of asking, “Why is this doorway such a pain?”
Because small access problems happen repeatedly, they become bigger than they look.
If you cross the same doorway ten times a day, that tiny lip becomes ten tiny frustrations. Add a trolley, a heavy load or bad weather, and it becomes a genuine safety and usability issue.
A rubber threshold ramp helps remove that little barrier.
It is not trying to reinvent the building. It is just making the doorway work the way it should have in the first place.
The Rubbr Threshold Ramp Range: Which One Is Right for You?
Rubbr has two main solid rubber threshold ramp widths: 900mm and 1000mm.
Both are made from durable recycled rubber. Both have a non-slip surface. Both are designed for indoor and outdoor use. Both can help create smoother access over door thresholds, small curbs, garage lips and raised entry points.
The biggest difference comes down to the width of the ramp and the size of the threshold you are trying to cover.
The 900mm Solid Rubber Threshold Ramp
The 900mm Solid Rubber Threshold Ramp is a practical choice for common access points where you need a straightforward ramp across a standard doorway, garage lip, shed entrance or small raised edge.
The 900mm width works well when you do not need the full metre of coverage, but still want enough width for wheelchairs, trolleys, carts, prams and day-to-day foot traffic.
This is the one to look at when the problem is simple:
You have a raised threshold.
You need a smoother way over it.
You do not need a huge ramp or an elaborate setup.
The current 900mm option is listed with a 150mm run and 25mm height. That makes it a useful fit for a low but annoying doorway lip, garage threshold or small curb where a short gradual rise is enough to smooth things out.
It is a good “stop fighting with the door track” product.
The 1000mm Solid Rubber Threshold Ramp
The 1000mm Solid Rubber Threshold Ramp gives you more width and more size options.
That extra 100mm may not sound like a lot, but it can be useful for wider doorways, shopfronts, larger access points, wheelchair access, trolley movement or any area where you want more coverage across the opening.
More importantly, the 1000mm range comes in a wider range of height and length profiles.
That means you can better match the ramp to the threshold you are dealing with.
The range includes options starting from low-profile ramps for small 10mm lips, through to larger 65mm-high options for more substantial doorway thresholds, raised edges and garage entries.
That is where the 1000mm ramp becomes the more flexible choice.
If you are not sure what size you need, start with the height of the raised edge. Measure from the lower floor to the top of the threshold. Then choose the ramp height that best matches it.
Do not eyeball it.
Doorways have a funny habit of looking lower than they are right up until the ramp arrives and does not quite meet the lip.
A tape measure is cheaper than buying twice.
When to Choose the 900mm Ramp
The 900mm Solid Rubber Threshold Ramp is best when you have a fairly standard access point and need a simple, practical solution.
It is a great fit for:
-
A standard home doorway
-
A back door or laundry door
-
A garage entry with a low lip
-
A shed entrance
-
A small curb between rooms
-
A lower workshop threshold
-
A trolley path through a doorway
-
A pram access point
-
A small raised transition in a shop or office
The key thing is that the threshold itself is relatively low and the access point does not need the extra width of the 1000mm model.
If you are working with a 25mm doorway lip, the 900mm ramp is a clean, cost-effective option. It gives you a smoother approach without needing to overcomplicate the job.
It is the kind of ramp you buy because you are tired of that one doorway being annoying.
Fair reason, honestly.
When to Choose the 1000mm Ramp
The 1000mm Solid Rubber Threshold Ramp is the better choice when you need more width, more size flexibility or a ramp for a larger threshold.
It makes particular sense for:
-
Wider home entry points
-
Double doors
-
Shopfronts
-
Commercial doorways
-
Warehouse entrances
-
Wheelchair access paths
-
Larger garage and workshop lips
-
Trolley-heavy access points
-
Areas with more foot traffic
-
Thresholds higher than a standard low doorway lip
The 1000mm ramp is especially useful when the access problem is not just a small 25mm step.
For example, if you have a 40mm, 60mm, 80mm, 100mm, 120mm or 150mm raised edge, you need a ramp profile that meets that height properly. That is where the broader 1000mm range is useful.
Instead of forcing one ramp to do every job, you can choose a height and length combination that makes sense for the threshold.
That is better for access, better for stability and better for anyone rolling a trolley through the door without wanting it to launch into the room.
Why Ramp Height and Length Matter
When choosing a threshold ramp, most people focus on the width.
Width matters, but height and length matter just as much.
The height tells you whether the ramp will properly meet the raised threshold.
The length tells you how gradual the slope will be.
A longer ramp creates a gentler rise. That is generally easier for wheelchairs, mobility aids, trolleys, prams and carts.
A short ramp can work well for a very low threshold, but if you try to use it on a taller lip, the ramp can become too steep.
That is why Rubbr’s 1000mm threshold ramp range has multiple combinations.
A lower threshold may only need a short, low-profile ramp.
A taller garage lip or raised entry point will usually need more length so the incline is not too aggressive.
You do not need to turn this into a maths assignment.
Just follow the basics:
Measure the threshold height.
Measure the doorway width.
Check how much room you have in front of the threshold.
Choose a ramp that meets the height cleanly and gives you a reasonable slope.
If the threshold is higher, go for a longer ramp profile.
Simple.
Threshold Ramps for Wheelchairs
Threshold ramps are one of the easiest ways to improve wheelchair access over small raised edges.
A wheelchair can struggle with even a low doorway lip. The front casters can catch. The user may need to build momentum. The rear wheels may bump hard over the threshold. And if the doorway is narrow or the floor space is tight, it can become even more difficult.
A correctly sized rubber threshold ramp creates a gradual path over the raised edge.
For a narrower home doorway or a standard low threshold, the 900mm ramp may be enough.
For wider doorways, mobility access paths, commercial buildings or locations where extra width makes movement easier, the 1000mm ramp is usually the smarter choice.
The important thing is that the ramp is wide enough for the wheelchair and positioned squarely against the threshold.
The ramp should sit flat. It should not rock. It should not leave a gap at the top. And the approach path should be clear.
A ramp is there to make access easier. It should not become a new obstacle halfway through the job.
Threshold Ramps for Prams, Trolleys and Carts
Threshold ramps are not only for mobility access.
They are also a very useful fix for people moving things.
Prams, delivery trolleys, hand trucks, hospitality carts, tool carts, cleaning equipment and warehouse trolleys all hate sharp edges. Wheels catch. Loads shake. Things tip. People end up lifting equipment over a lip that did not need to be a problem in the first place.
At home, this might be a pram rolling through a front door or a heavy wheelie bin being moved through the garage.
In a business, it could be stock carts moving through a storeroom door, delivery trolleys coming through a shopfront, or tools being rolled into a workshop.
The 900mm ramp works well for ordinary doorways and lower-traffic access points.
The 1000mm ramp makes more sense when the doorway is wider, the carts are larger or the access point gets more use.
A wider ramp gives you more room for a trolley to stay on track. That matters when someone is trying to steer a loaded cart through a doorway at 7:30 in the morning.
No one wants to be the person picking stock up off the floor because a 25mm lip won the battle.
Home, Garage, Shed or Workshop: What Should You Choose?
For a home doorway, the answer is usually straightforward.
If you have a low threshold and a standard-width entry point, the 900mm ramp is often enough.
If you have a wider doorway, double doors, a wider garage entrance or a bigger raised lip, the 1000mm ramp gives you more flexibility.
For garage and shed entries, the key question is not just width. It is height.
Garage lips can be higher than normal door thresholds. That is why the range of 1000mm ramp sizes is helpful. You can choose something that suits the actual rise rather than trying to make a lower ramp do a bigger job.
For workshops, think about what will be moving over the ramp.
If it is just foot traffic and a small trolley, a lower ramp may be fine.
If it is a tool cart, equipment trolley or heavier wheeled gear, make sure the ramp height, width and slope suit the load and access path.
And please do not assume every doorway is the same. The one that “looks about the same” often turns out to be the one with the extra 20mm lip.
Classic.
Threshold Ramps for Shops, Offices and Commercial Buildings
In a business setting, access issues can affect customers, visitors, delivery drivers and staff.
A small threshold at a shopfront can make entry harder for wheelchairs, walkers and prams. A raised storeroom lip can make deliveries more difficult. A doorway between a warehouse and office area can be a nuisance every time stock or equipment needs to move through.
This is where the 1000mm Solid Rubber Threshold Ramp often makes more sense.
The extra width gives better coverage across wider commercial access points. The range of heights also makes it easier to select a ramp that matches the doorway rather than settling for something close enough.
For commercial, public-access or high-traffic locations, proper installation matters.
The ramp needs to sit flat, stay stable and be aligned with the access path. If it needs to be permanently fixed, use suitable fixings. If it is in a busy public area, getting a professional to install it properly is usually worth it.
A threshold ramp should feel like part of the entrance, not like something someone threw down five minutes before opening.
Indoor vs Outdoor Use
Both Rubbr threshold ramp options are made from recycled rubber and have a non-slip surface, making them suitable for indoor and outdoor entry points.
But outdoor areas need a little more thought.
Rain, leaves, dirt, mud and debris can all build up around the ramp. If the ramp is used outside, keep the area clear so the surface can maintain grip and the ramp can sit flat.
A quick sweep or hose-down is usually enough.
For indoor use, the main thing is stability. Make sure the ramp is firmly against the threshold and does not shift as people, wheelchairs, prams or trolleys move over it.
The good thing about rubber is that it is practical.
It handles everyday bumps. It gives you grip. It is easier to position than concrete or metal. And it does not make a doorway look like a temporary construction site.
That is the goal.
How to Measure Before Ordering
You only need three measurements.
First, measure the height of the threshold.
That is the distance from the lower floor to the top of the raised lip.
Second, measure the width of the opening.
If it is a standard doorway, the 900mm ramp may be enough. If it is wider, or you want extra clearance for a wheelchair, trolley or pram, look at the 1000mm option.
Third, measure the space in front of the threshold.
You need enough room for the ramp to sit flat without blocking a path, door swing or access route.
Once you have those numbers, choosing becomes much easier.
For example:
A low 25mm door lip at a standard-width entry may suit the 900mm ramp.
A 40mm or 60mm raised edge at a wider doorway may be better suited to one of the 1000mm ramp profiles.
A taller garage lip, workshop entry or commercial threshold may need a longer 1000mm ramp so the incline stays manageable.
If you are not sure, take a photo of the threshold with a tape measure next to it. That gives you a much better reference point than trying to explain it from memory.
“It is sort of knee-high but not really” is not a measurement system we recommend.
Installing a Rubbr Threshold Ramp
Threshold ramp installation is usually straightforward.
Start by cleaning the area. Remove dust, stones, leaves and debris. The ramp needs a flat, stable surface underneath it.
Position the ramp firmly against the raised threshold. Make sure the top edge meets the lip cleanly. Check that it sits flat and does not rock.
Then test the path.
Push a trolley over it. Roll a pram through. Check wheelchair access if that is the purpose. Make sure it is aligned with the natural direction of travel.
For a home or low-traffic access point, the ramp may sit securely in place as is.
For a commercial building, public entry point or high-traffic workspace, suitable fixings may be the better option. This is especially relevant where the ramp could shift due to repeated trolley movement, heavy use or outdoor conditions.
The installation is simple, but the result should be solid.
A ramp that slides, rocks or leaves a gap is not doing the job.
Common Threshold Ramp Buying Mistakes
The most common mistake is buying based only on width.
Width matters, but height matters more. The ramp has to meet the threshold properly.
The second mistake is choosing a ramp that is too short for the rise.
A taller threshold needs a longer ramp profile. Otherwise, the incline becomes too steep and you are back to making access harder than it needs to be.
The third mistake is assuming one ramp works for every doorway.
It does not.
A 25mm laundry lip, a 65mm garage edge and a 120mm warehouse threshold are different jobs. That is why the 1000mm range has multiple height and length combinations.
The fourth mistake is forgetting the access path.
Make sure the ramp does not interfere with a door opening, walkway, gate or turning space.
The fifth mistake is leaving a ramp loose in a high-traffic area.
For some home settings, that is fine. In busy commercial or public settings, secure installation may be more appropriate.
The sixth mistake is using timber, metal offcuts or random DIY materials instead of a purpose-made threshold ramp.
That stuff might work for a while.
But it can slip, rot, catch wheels, become slippery or make the doorway look like you lost an argument with Bunnings.
A proper rubber threshold ramp is designed to solve the problem without creating another one.
Why Rubbr Threshold Ramps Are Different
We are not trying to sell you a giant accessibility project when you only need to fix a doorway lip.
Rubbr threshold ramps are designed as practical, cost-effective rubber access solutions.
They are made from recycled rubber. They have a non-slip surface. They are built for indoor and outdoor use. They are suitable for wheelchairs, trolleys, carts, prams and foot traffic.
The 900mm ramp gives you a straightforward option for standard lower thresholds.
The 1000mm ramp gives you more width and a much wider choice of heights and lengths, making it the better option for larger access points and more substantial raised edges.
That is the point of having a range.
You can choose the product that fits the doorway rather than forcing the doorway to work around the product.
Frequently Asked Questions About Rubbr Threshold Ramps
What is the difference between the 900mm and 1000mm threshold ramps?
The main difference is width and size availability. The 900mm Solid Rubber Threshold Ramp is a practical option for common access points and is currently available in a 150mm-long × 25mm-high profile. The 1000mm Solid Rubber Threshold Ramp provides extra width and comes in a broader range of height and length options for thresholds from 10mm through to 65mm high.
Which threshold ramp is best for a wheelchair?
It depends on the doorway width and threshold height. For a standard doorway with a low raised lip, the 900mm ramp may work well. For wider access points, commercial settings or taller thresholds, the 1000mm range gives more width and more ramp profiles to choose from.
Can I use a Rubbr threshold ramp outside?
Yes. Rubbr threshold ramps are designed for indoor and outdoor use. Keep the ramp surface clear of dirt, leaves and debris so it stays stable and maintains grip.
Are Rubbr threshold ramps good for trolleys and carts?
Yes. Both the 900mm and 1000mm threshold ramps are designed to make movement easier for trolleys, carts, prams and other wheeled equipment over small raised edges.
How do I choose the correct ramp height?
Measure the raised threshold from the lower floor surface to the top of the lip. Choose a ramp height that matches the threshold as closely as possible. For taller thresholds, choose a longer ramp profile to create a gentler slope.
Do Rubbr threshold ramps need to be fixed down?
Not always. In lower-traffic areas, the ramp may sit securely in place when positioned flat against the threshold. For commercial, public-access or high-traffic areas, suitable fixings may be recommended for a more permanent installation.
Will a threshold ramp reduce trip hazards?
A correctly installed threshold ramp can soften a sharp raised edge and create a more gradual transition, which can help reduce the risk of catching a foot or wheel on the lip.
Final Thoughts
A small doorway lip can create a surprisingly big daily problem.
It can catch wheelchair wheels. It can stop trolleys. It can make prams bump. It can become a trip hazard. It can turn a simple doorway into something everyone has to think about.
Rubbr threshold ramps are designed to make that transition easier.
Choose the 900mm Solid Rubber Threshold Ramp when you need a simple, practical solution for a low threshold at a standard access point.
Choose the 1000mm Solid Rubber Threshold Ramp when you need more width or a ramp profile that matches a taller raised edge, garage lip, workshop entry or commercial doorway.
Measure the height. Check the width. Choose the right profile.
Then let the doorway go back to being just a doorway.